iOBD2 for BMW is a new practical car diagnostictool for bmw . It can diagnose all the electronic control systems , Service Reset and read data for BMW series cars.It supports iOS devices and communicates withthem via Wi-Fi. It records the data by the client software of the phone. It records data like engine speed, ignition time, fuel correction, fuel consumption, coolant temperature, when you are driving the car and it shows these data by form or graph format.
IOBD2 for BMW Special Features
1.Diagnosis Automatically identify the systems of the car and diagnose the systems in detail.
Click [Diagnosis], all the electronic control systems will display .Choose the one you want to test . You can also scan the status ofeach electronic control system and erase the trouble codes. The tested data can be saved and you can review the saved data in History menu.
2.Reads/ Clears trouble codes
Reads and clear trouble codes and shows theirdetailed information.
3.Reads Data Stream
Reads all running parameters related to ECU system.
4. Service Reset
The service reset functions are exclusive for BWM series cars. You can resetoil service light, front brakes, rear brakes, spark plugs, brake fluid etc.
Vehicle info
Clear fault codes
Data Stream
IOBD2 Common Functions introduction
XTOOL iOBD2 Performance gauges:
- Engine speed
- Corrected vehicle speed
- Open/closed loop
- Boost/vacuum combo gauge
XTOOL iOBD2 Fuel economy gauges:
- Inst. fuel economy
- Avg fuel economy
XTOOL iOBD2 Engine gauges:
- Timing (spark advance)
- Engine coolant temp.
- Intake air temp.
- Ambient air temp.
- Manifold absolute pressure
- Mass air flow
- Fuel trims, short and long term
- Percent engine load
- Catalyst temp.
- Fuel pressure
- Lambda gauge
- Air/fuel ratio
XTOOL iOBD2 Function:
1. Diagnostic
Read DTC: Read the current DTC that engine has stored, and DTC info.
Clear DTC: Clear all the current DTC.
Live data: Read all the running parameters that related to the ECU.
Freeze frame data: OBD system will record the system running parameters related to the malfunction the moment when it occurred at the same time when it set the DTC. And this group of data is called freeze frame data.
Readiness test: Readiness reflects the status that all the valid diagnostic functions. The diagnostic functions are referring to the important monitoring functions in OBD system, e.g. sensor monitoring, sensor heater monitoring, and EGR system monitoring, etc. These diagnostic functions are closely related to the engine emission control.
Read vehicle info: Read vehicle info such as Vehicle Identification Number(VIN), Calibration IDs(CALID) and Calibration Verification Number (CVN).
Sensor test: This service is to allow access to the on-board oxygen sensor monitoring test results. The same information may be obtained by the use of Mode 6 test.
Mode 6 test: This service is to allow access to the results for on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalyst monitoring and the evaporative system monitoring.
EVAP System Test: The purpose of this service is to enable the external test equipment to control the operation of an on-board system, test or component.
2. My dashboard
Idle mode: engine rotational speed, water temperature, battery voltage, Air-intake temperature, Instant fuel consumption(static), average fuel consumption, Ever wished you had your own customizable gauges, showing only the data you were interested in
Cruise mode: vehicle speed, The current engine load, water temperature, Vehicle travel time, vehicle travel average speed, Continuous running mileage, instant fuel consumption(dynamic), Ever wished you had your own customizable gauges, showing only the data you were interested in.
Sport mode: engine rotational speed, vehicle speed, water temperature
3. Performance test
Accelerate/Decelerate test: Test acceleration/deceleration process time and distance
0 to 400m acceleration test: test spend time from 0 to 400 meters.
Diagnostic software updating
Users can find out the latest software release info, downloading and installing procedures info by logging on to app store.
History
Record DTC, live data, freeze frame data, my dashboard data. And you can share the record what you get from the car by IOBD2 on Twitter and Facebook.
Emissions Testing:
- Read and clear diagnostic trouble codes
- IM Readiness status
Components
The hardware includes: iOBD2 unit
The software includes: iOBD2 client software, you can source iobd2 software and download it from apple store.
Wholesale Contact Information
Email: sales@xcar360.com
Skype: uuc050
MSN: sales@xcar360.com
How To Buy Our Products

Product Reviews
Name | Rating | Review |
---|---|---|
Aquar x. (Posted on 2016-05-07) | I RECIEVED IT AND TESTED, NOT BAD AND WORTHY IT |
|
phiny (Posted on 2016-05-07) | good service! shipping fast and i test it , it works well |
|
mario J. (Posted on 2016-05-07) | good product!! it works well with my BMW |
3 Item(s)
No Picture! Be the first to Post a Picture of this product! and get Xcar360 points!
Product Consulting
- does this tool access airbag, immobilizer, abs, and other systems? can it perform coding/calibration of components?
- March 16, 2014
- I think you need this tool new diagnostic tool for BMW is BMW ICOM A2 http://www.xcar360.com/bmw-newest-diagnostic-interface-bwm-icom-a2-b-c.html Best Regards Xcar360