WIFI Wireless ELM327 OBD2 Car code Reader With switch supports all OBD-II protocols.It is fully compatible with many software, such as such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc..WIFI Wireless ELM327 OBD2 Car code Reader With switch  (must have TORQUE APP ANDROID or similar)Support all OBDII protocols as follows:
ISO15765-4 (CAN);
ISO14230-4 (KWP2000);
ISO9141-2;J1850 VPW;J1850 PWM

This bluetooth  Wirless ELM327 with switch , you can off the power if you don`t use it.

It can support IOS/Android/PC you can download software 

TORQUE PRO 1.8.8

This WIFI interface support all OBDII Protocls.

This WIFI OBD interface are fully compatible with many software, such as such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc.

SSID: OBDDevice, IP/Port: 192.168.0.10:35000, Antenna: Internal, Wifi Standard: 802.11a/b/g

Functions:

1.Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database).
2.Clear trouble codes and turn off the MIL ('Check Engine' light)
3.Display current sensor data
4.Engine RPM
5.Calculated Load Value
6.Coolant Temperature
7.Fuel System Status
8.Vehicle Speed
9.Short Term Fuel Trim
10.Long Term Fuel Trim
11.Intake Manifold Pressure
12.Timing Advance
13. Intake Air Temperature
14.Air Flow Rate
15.Absolute Throttle Position
16.Oxygen sensor voltages/associated short term fuel trims
17. Fuel System status

18.Fuel Pressure AND MORE!A Must have product in your car!

ELM327 Supported Protocols:

• SAE-J1850 PWM (41.6 kbaud)
• SAE-J1850 VPW (10.4 kbaud)
• ISO 9141-2 (5 baud init, 10.4 kbaud)
• ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
• ISO 14230-4 KWP (fast init, 10.4 kbaud)
• ISO 15765-4 CAN (11 bit ID, 500 kbaud)
• ISO 15765-4 CAN (29 bit ID, 500 kbaud)
• ISO 15765-4 CAN (11 bit ID, 250 kbaud)
• ISO 15765-4 CAN (29 bit ID, 250 kbaud)

Wholesale Contact Information

Email: sales@xcar360.com
Skype: uuc050
MSN: sales@xcar360.com