Shopping Global One World One Price

NitroData Chip Tuning Box NitroOBD2 tuning tool


History:423 Sold

Free Shipping

Availability: In stock

  • Buy 5 for $5.50 each and save 9%
  • Buy 10 for $5.00 each and save 17%
  • Buy 50 for $4.00 each and save 34%

5 loyalty point(s).

Price Match

Please submit the url of the better price u saw. We will lauch an immediate investigation and try our best to beat the price if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competative prices.

Product URL
Product Price

NitroOBD2 is a Plug&Drive Ready device to function the increasing the performance of engine. it is a update version of Nitordata chip tuning Box.NitroData [Chip Tuning Box] unit enhances the performance of your turbo diesel engine, and turbo benzine from 35% power, 25% torque and also reduces consumption by up to -10%. It is ver easy to use.

NitroOBD2 Chip Tuning Box Plug and Drive OBD2 Chip Tuning Box

NitroOBD2 Diesel : Red
NitroOBD2 Benzine: Yellow

NitroOBD2 : More Power / More Torque

NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996. 
It works based OBD2 protocols as remaping the Car's computer ECU. After driving 200 km road total, NitroOBD2 adjusts itself to the car, 
according to the drivers' habits and always keeps remaping the ECU to increase the performance of engine.

What does NitroOBD2 make?
According to your driving habits, NitroOBD2 makes new map in the car's computer ECU to increase the performance of your car. 
As you driving much more KM/Mile, it renews the map. Thus it keeps the vehicle's power and torque increasing.

What is NitroOBD2 Chip Tuning Box?

NitroOBD2 is a Chip Tuning Box which can be plugged into OBD2 connector of your car to increase the performance of your car. 
When it plugged into OBD2 connector, NitroOBD2 receives the information from the car computer ECU. With the received data from ECU, 
NitroOBD2 adjusts the boost pressure, quantity of fuel, injection timing and pressure to increase the performance of your car. 
NitroOBD2 Chip Tuning Box does not exceed the manufacturer requirements. It works only within the tolerance of the engine. 
NitroOBD2 finds out the hidden power of your car. NitroOBD2 does not damage the engine and the car computer ECU or not cause any negative effects to the car factory setting. 
NitroOBD2 does not change any of the settings permanently. To turn back to the car's original settings, just unplug NitroOBD2 from OBD2 connector.

NitroOBD2 finds out the hidden power of your car.
- Up to 35% more power 
- Up to 25 % more torque

NitroOBD2 is very easy to use. 
Plug NitroOBD2 into OBD2 connector of your car. And turn the ignition on for 30 seconds. And Turn the engine on. 
NitroOBD2 settings are optimal and the best for your car. Even the parameters are different for each vehicle, 
there might not be a need to make an additional adjustment. NitroOBD2 will recognize your vehicle and your driving habits after around 200 km/150 miles driving, 
and then NitroOBD2 adjusts itself to match your car perfectly.

NitroOBD2 works on the basis of changing the signal form ECU. As a consequence, it changes the whole injection map. 
The main difference between NitroOBD2 Chip Tuning Box and Remapping tuning methods is that NitroOBD2 Chip Tuning Box is easily removable, 
and after unplug you go back to the factory settings. EcoOBD2 is the cheap and safe type of tuning. 
Remapping is a permanent change to your car. This is the expensive tuning and you cannot remove it. 
NitroOBD2 is equipped with the engine protection function and 100% safe for your car engine. 
NitroOBD2 produced on the printed circuit board in SMD technology. NitroOBD2 Chip Tuning Boxes are high quality.

Installation and Calibration

1 - Pull the Car Key out from the ignition.
2 - Find OBD2 connector(*) in your car and Plug in EcoOBD2
3 - Insert the key into the ignition and twist the key to the first stage. (Do not start the car)
4 - Press the reset buttom for about 5 sec. After releasing the buttom, just wait for a while about 30-54 sec. (EcoOBD2 will communicate and establish connection with ECU)
5 - Start up the engine.
6 - EcoOBD2 will recognize your vehicle and your driving habits, after around 200 km/150 miles driving and thus EcoOBD2 will adjust itself to match your car perfectly for more fuel saving.

NitroOBD2 Diesel : Red
NitroOBD2 Benzine: Yellow
Each device available for LPG.

Does your car have OBD2 connector?
On-Board Diagnostics, or "OBD," is a computer-based system built into all 1996 and later light-duty vehicles and trucks, as required by the Clean Air Act Amendments of 1990. 
OBD systems are designed to monitor the performance of some of an engine's major components including those responsible for controlling emissions.

OBD2 necessarily for cars: 
- Sold after January 1, 1996 in the USA 
- Sold after January 1, 2001 in the European Union 
- With diesel engine sold after January 1, 2003

(*)Where located OBD2 connector in your car?
1 Driver's side, underneath dasboard, in the area under the steering
2 Driver's side, underneath dasboard,between the driver-side door and steering column area
3 Driver's side, underneath dasboard, between the steering column area and the center console
4 Driver's side, dashboard instrument/gauge area, between the steering column and center console
5 Driver's side, dashboard instrument/gauge area, between the driver-side door and steering column
6 Center console, vertical surface left of vehicle centerline
7 Center console, vertical surface right of vehicle centerline or on passenger side of center console
8 Center console, horizontal surface in front passenger area.

Certificates : CE / FCC / RoHS

Package content:
- NitroOBD2 Chip Tuning Box Interface
- User Manuel English

weight : 40 gr ( 0.04 kg )

Wholesale Contact Information

Skype: uuc050

How To Buy Our Products

Product Reviews

Customer Photos

No Picture! Be the first to Post a Picture of this product! and get Xcar360 points!

Product Consulting

hi im looking for compatibility of the nitrodata chip tuning box on a seat leon mk2 2010 model will this work ok with can network systems ?? ] thanks danny
April 10, 2015
Hi,friend Yes, it works on your car Best Regards Steven
Hey does this NitroOBD2 benzin works on a mazda 3 from 2004?
May 16, 2015
Yes, it works on your car
Hallo! Funktioniert dieser Chip bei einem Peugeot 207 1.4 16V Benziner Baujahr 2007 88ps ??
May 22, 2015
Hi,friend Yes all OBD car can use Best Regards Steven
Is this product free shipping to Taiwan? In DHL or EMS ?
July 11, 2015
Hi,friend It is post free shipping to Taiwan Best Regards Steven
I have suzuki swift 1998 with obd conector this product work my car?
July 28, 2015
Hi,friend all obd2 cars can works Best Regards Steven
Hi, I live in Portugal and I have a Audi A3 8L of 99 - 1.6 ( 101 hp ) benzin/gpl. This equipt works in my car? works fine with gpl? Thanks
April 4, 2016
Hi,friend it is OBD2 car? only support OBD2 car

Having problem with this product , you can