Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG is the latest interface for For Mercedes & SMART vehicles can replace Star C4/C5. VXDIAG For XENTRY Diagnosis VCI acts as a Pass-through Interface, also called Star C6, For Benz C6 multiplexer to provide complete communication between a vehicle and the VXDIAG For XENTRY software loaded on a PC.
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG Overview:
Compatible Software: VXDIAG For XENTRY/Das Software
Support Vehicle: Mercede For Benz & Smart vehicles
DoIP: Support DoIP
Functions: Star Diagnostic & programming (SCN Coding)
What is DOIP
DOIP is ISO 13400 diagnostic protocol
ISO 13400-1:2011 describes the general use cases and communication scenarios which are covered by an Internet Protocol-based vehicle communication standard. Each use case drives specific communication capabilities of the vehicle communication interface, for instance in order to be interoperable in an existing computer network.
The diagnostic communication over Internet Protocol (DoIP) protocol supports the standardized service primitive interface as specified in ISO 14229-2.
The descriptions in ISO 13400-1:2011 cover different application layer implementations, such as:
enhanced vehicle diagnostics (system diagnostics beyond legislated functionality, non-emissions-related system diagnostics);
WWH-OBD (World-Wide Harmonized On-Board Diagnostics) as specified in ISO 27145-2 and ISO 27145-3.
The mercedes Land Rover JLR all use this new Diagnostic Protocol now.
Where need DOIP device
when we test mercedes new car like w222 w205
In Audio\Comand section you can find DoIP test page.
If cable is DoIP you will see green mark that DEVICE is Ok.
Xentry will prompt you that other device must carry yellow marks.
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG Features:
- Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG can be used for all model series of For Mercedes For Benz vehicles
- Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG support DoIP, cover more functions during SCN Coding than SD C4/C5
- Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG functions including diagnosing, programming, simulation studying, repair information, automotive maintenance, technical service bulletin and so on
- Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG Diagnosis updates no longer necessary – firmware updates required on rare occasions
- Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG does not need a power supply unit for external power supply
- Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG Handy multiplexer with a small, sturdy construction (no PC core, battery, fan, or display)
- Engines (All Gasoline & Diesel Systems)
- Transmissions and Electronic Selector Modules
- Airmatic and Active Body Control Suspension Systems
- Traction Systems: ESP / ASR / ETS / ABS / BAS / SBC braking systems
- Supplementary Restraint Systems (SRS) / Airbag, All body modules OCP / UCP / LCP / SCM / SKF / KFB / RCM / DCM’s
- Drive Authorisation System
- Sam (Signal Acquisition) Modules
- Electronic Ignition System (EIS)
- Pneumatic System Equipment and ATA functions
- Air Conditioning / climate control Systems
- Instrument Cluster
- Tyre Pressure Control
- Parktronic System
- Keyless Go
- D2b Command & Audio Gateway (D2B and MOST networks)
- TV Tuner
- Headlamp Range Adjustment
- Seat Electronics
- Rvc, RST & Vario Roof modules
- Automatic Clutch System ACS
- M-Class Body Modules (AAM / EAM / DAS / SEM / VG Transfer Case)
- Assyst & ASSYST + systems
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG Summary:
Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG (Vehicle Communication Interface) multiplexer serves as the interface to the vehicle when performing diagnosis and repairs, and programming electric and electronic on-board vehicle systems.
The Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG does not have its own PC core, battery, fan, or display. It is operated using the VXDIAG For XENTRY Diagnosis Pad via WLAN or a USB cable connection.
Notice :
1.Please install the 500GB HDD on laptop above 4GB Memory and I5 CPU, and use it on one laptop only. If change laptop, software may get broken and need to ship HDD back to us to copy software again.
2.ThisMercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG can/'t support All Key Lost,needs one key at least.
PC Requirement:
Processor: Pentium 4 / 1.6GHz+.
Memory: 1G Bytes or more.
Hard disk: 40G or more.
Display: Resolution 1024x768 or higher.
Network interfaces: LAN 10 / 100M or 802.11b / g.
Communication Interface: USB2.0 or USB3.0
Specification:
Item State
RAM 32bit180MHz ARM
FLASH 1MByte FALSH
Diagnostic Port 24PIN, self-determination design
LED 4 LED indicator light,indicate power and status.
Power DC 9V-36V
Consumption 3W
Working Temperature -20°C~70 °C
Storage Temperature -40°C~85 °C
Warranty: One Year
1pc x Mercedes Benz Xentry diagnosis VCI DOIP Pass thur interface C6 VXDIAG
1pc x OBDII Cable
1pc x USB Cable
1pc x 500GBhdd







Wholesale Contact Information
Email: sales@xcar360.com
Skype: uuc050
MSN: sales@xcar360.com