Shopping Global One World One Price

ELM327 V1.5 USB OBDⅡ Scanner

100 100 21


History:12 Sold

Free Shipping

Availability: In stock


13 loyalty point(s).

Price Match

Please submit the url of the better price u saw. We will lauch an immediate investigation and try our best to beat the price if it proves to be the same product. We will notify you the result by email. Thanks a lot for helping us to maintain competative prices.

Product URL
Product Price

Support 9 protocols in all- SAE J1850 PWM, SAE J1850 VPW, ISO9141-2 and ISO14230-4 as well as CAN Bus ISO15765-4.
Precision-moulded diagnostic connector made to fit all VW/Audi vehicles, even those with "tight" trim around diagnostic socket.
USB port design.
Internal EEPROM can remember the last protocol.
Voltage input monitors your vehicle's battery.

New for V1.5:
General Items:
RS232 baud rates to 500 Kbps
Adaptive Timing automatically adjusts ST timeouts
Power up to AT MA is selectable
Source (tester) address can be changed
Can reset all PPs with a jumper
Receive addresses can be independently set
Power Control with a low power standby mode
A 4800 baud ISO option
A non-volatile memory location for storing user data
CAN extended addressing support
You can now perform ISO/KWP bus initializations without having to send a request
An SS command allows searching through the OBD protocols sequentially
A new TA command allows the Tester Address to be easily changed
Factory calibration for the voltage reading circuit can be easily restored
Complete control over in frame responses (IFRs)
Delay before protocol 2 helps with some GM/Holden vehicles
ISO9141 and ISO14230:
The slow initiation address can now be varied
Control over key word checking
KWP protocols can now transmit 3 or 4 byte headers
New J1939 protocol
Two user-definable CAN protocols
Improved error handling and recovery
Extended addressing support

ELM327 Based - Datasheet
OBDII Plug: J1962 16-Pin Male (to Car)
USB  Port : (to Computer or PDA)
High quality UL certified USB Cable (equivalent to CE).
CAN (ISO 15765-4)
Automatically searches for the correct protocol or can be configured manually.
USB Port
Serial Interface uses AT commands to look like a modem.
Status LED
Length with USB Lead : 1.5 metres

Turn the car's ignition switch ON. No need to start the engine.
Start the software program, click "Options", select the correct communications port.
Your interface now works! Make sure the software can reliably access all the control modules that it should in your car.

Package included:
1pc x ELM327 V1.5 Interface
1pc x CD Driver

Wholesale Contact Information

Skype: uuc050

How To Buy Our Products

Product Reviews

Name Rating Review
Andi (Posted on 2012-10-08)
Received product as promised. Could have included simple user guide to set up the program. It took me a litle while to sort things out. But it worked out great. I cleared some simple error codes immediately.
Clayton (Posted on 2012-09-30)
This OBDII USB scanner is provided with several freeware applications, however only one of them works well with XP. It provides more than the basic information of the handheld scanners. I had no communication problems. Bottomline: I recommend this scanner for those with a laptop.
Walden (Posted on 2012-08-29)
The OBDII scanner worked perfectly. I plugged it in, connected to it on my phone, and opened Torque. It immediately recognized it and connected to it and within minutes I was able to view all of the info that was available. Tried it on our other vehicle and it worked solidly with it also (and even provided more information)! Very pleased with this and would recommend it to a friend.
Hammer (Posted on 2012-08-26)
Unbelievable for the money. I have used it on six different vehicles and it worked perfectly with all of them.
Chester (Posted on 2012-07-24)
i bought this item i used it with my old dell and it worked great you have to play with the settings com port and such but once you set it up it works great reads the codes erases them tells you what the code is. i personally used it on my 1996 volvo 850R and it read fine i have also used it on a 95 dodge neon and 98 isuzu rodeo it read fine no problem and erased the codes as well if you do mechanic work your self i would get it extremley helpful
Napoleon (Posted on 2012-07-22)
For the low price I got what I expected out of this. Its not the fastest one out there by any means but it gets the job done and has a pretty good refresh/transmit rate.
Duke (Posted on 2012-06-21)
The item as described and easy to use with nearly 4 software you can use them as you like with this tool
Edward (Posted on 2012-06-18)
I used this with the Torque app to read my truck's diagnostic information and couldn't be happier. It paired right away and kept working fine through a half-hour drive. This is a smart product to keep around for anyone interesting in maintaining their own vehicle.
Ivan (Posted on 2012-06-16)
I bought this product last week after reviewing many positive comments about this seller and their products. Got the product fairly quickly as promised. I have a 2005 BMW 745i. I recent have the car engine light on and dealer wants $150 for diagnostic. So I bought this product and give it a try. ELM 327 OBDII scanner works great the first time I used it.
Randell (Posted on 2012-05-26)
I bought this to work with my Torque app on android. It was well worth the purchase price and works flawlessly. Great product.

Items 1 to 10 of 21 total

per page
  1. 1
  2. 2
  3. 3

Customer Photos

No Picture! Be the first to Post a Picture of this product! and get Xcar360 points!

Product Consulting

There are no product consulting , be the first add conuslting!

Having problem with this product , you can