You will be receiving email from us shortly. Thanks again for your trust and support. CARPROG FULL v4.74 (with all Software's activated and all 21 items Adapters and ADD adapter)
Firmware has been updated（all function can use,not the 4.01 Firmware use 4.74 or 5.31 software)
Warning
1 - NO INTERNET UPDATE (You’d better diconnect computer from Internet)
IF YOU MAKE INTERNET UPDATE .MCU IN INTERFACE WILL DAMAGE!
IT IS NO IN WARRANTY!
2 - ONLY USE WHICH SOFWARE I GIVE YOU IN CD
IF YOU USE OTHER SOFTWARE .MCU IN INTERFACE WILL DAMAGE!
IT IS NO IN WARRANTY!
Functions:Airbag repair,Car radios,odometers, dashboards, immobilizer,EEprom,MCU.ECU,Bikes,transponder
Software download click here
Descriptions of Carprog full v4.74
Carprog full v4.74 Function:
1. Make the Universal tool: CARPROG full v4.74 inside have powerful 16-bit MPU and full set of automotive interface drivers. In basic version you will get hardware with extra functions: 12 input/output pins for EEPROM in-circuit programmer, future possibility's to make on the same hardware Microcontroller Programmer, Immobiliser Transponder key programmer with antenna adapter for 125/134 kHz, K-line diagnostic (dashboard odometer programming, immobilizer key programming), CAN line diagnostic,+5V/+12V output, USB, power supply only from USB.
2. Make the Low Cost tool: with Carprog full v4.74 basic you will receive many extra functions (like car radio code calculator CC1, EEPROM programmer and VAG dashboard's programmer by CAN) and all additional software's you can buy extra according to your demands.
3. Make it User Friendly: Windows XP software, works without any installations, on all PC, use USB to PC link, all adapters schematics diagrams on-line.
Carprog full v4.74 Software:
ECU-OPEL- OPEL login reader from motor hybrid ECU. Works with Bosch ME1.5.5, Siemens SIMTEC71, SIMTEC71.1, Delco Diesel, Delco Multec.
OPEL CAN- Opel ECU by CAN programmer - read/change mileage in EDC16, MT35E, HSFI 2.2 read PIN, reset ECU
PSG16- Opel PSG16 diesel pump by OBDII - read/change mileage, read PIN, reset ECU
OPEC28- Opel Siemens Simtec ECU Tool Advanced
Carprog V4.74 compared with Carprog V4.01
Carprog full v4.74 airbag:
S5.1 - VAG (Audi, VW, Skoda, Seat) airbag reset Tool
S5.2 - BMW airbag reset Tool
S5.3 - Mercedes Benz airbag reset Tool
S5.4 - FORD airbag reset Tool
S5.5 - GM airbag reset Tool by OBDII
S5.6 - CARPROG CR16 Airbag tool - Audi, Mercedes, Ford, Volvo
S5.7 - Renault airbag reset tool
S5.8 - Peugeot airbag reset tool
S5.9 - Citroen airbag reset tool
S5.10 - Honda airbag reset tool
S5.11 - Audi airbag reset tool by direct connection to EEPROM or MPU
S5.14 - Ford airbag reset tool by direct connection to EEPROM or MPU
S5.16 - Hyundai airbag reset tool
S5.17 - KIA airbag reset tool
S5.18 - Lexus airbag reset tool
S5.19 - Rover airbag reset tool
S5.21 - Mazda airbag reset tool
S5.22 - Mitsubishi airbag reset tool
S5.23 - Nissan airbag reset tool
S5.20 - Mercedes Benz airbag reset tool by direct connection
S5.25 - Opel airbag reset tool by direct connection
S5.27 - Saab airbag reset tool by direct connection
S5.28 - Subaru airbag reset tool by direct connection
S5.30 - Toyota airbag reset tool by direct connection
S5.31 - Alfa Romeo airbag reset Tool
S5.32 - Fiat airbag reset Tool
S5.33 - Porsche airbag reset Tool
S5.34 - Suzuki airbag reset Tool
S5.35 - Volvo airbag reset Tool
S5.36 - Daewoo airbag reset Tool
Carprog full v4.74 Dash:
S7.1 - VAG CAN programmer
S7.2 - CarProg Dashboard programming
S7.3 - CarProg Dashboard programming package update
S7.4 - Fiat KM correction by OBDII
S7.5 - Mercedes Benz ASSYST explorer
S7.6 - VDO dash decrypt tool - Skoda Roomster, SuperB, VW Polo, Audi A3, A6, Allroad with 93C86 odometer change and PIN reading.anydiag.com
S7.7 - Ford odometer change by OBDII (by CAN)
S7.8 - VW 2007+ by OBD - Golf, Passat, Eos, Touran, Tiguan, Octavia with Micronas by diagnostic
S7.10 - VAG VDO dashboards by K-line OBDII diagnostic - VW T5, Passat B5, Skoda SuperB and others
2J74YAUDI - Audi 2J74Y repair software for CarProg
Carprog full v4.74 Immo:
S4.1 - Toyota Key Programmer
S4.2 - Lexus key programmer
S4.3 - Daihatsu Key Programmer
S4.4 - CarProg BMW Key programmer
S4.5 - Mercedes Benz Key programmer
S4.6 - RENAULT Megane/Scenic infrared key programmer
S4.7 - Kessy tool - A8, Touareg, Phaeton, Cayenne PIN code reader
Carprog full v4.74 Processor:
S2.1 - CARPROG Motorola (Freescale) HC05 MPU programmer
S2.2 - CARPROG Motorola (Freescale) HC11 MPU programmer
S2.3 - CARPROG Motorola (Freescale) HC08 MPU programmer
S2.4 - CARPROG Motorola (Freescale) 912 and 9S12 MPU
Carprog full v4.74 Programmer:
ST92 - ST92F120, ST92F150, ST92F250 internal EEPROM programmer
Carprog full v4.74 Radio Code:
S6.1 - CARPROG CC1
S6.2 - CARPROG CC2
S6.3 - CARPROG CCN
S6.4 - Philips Car Radio decoder
S6.5 - Renault Car Radio decoder by serial number
S6.6 - Audi/VW/Seat/Skoda car radio decoding software
RNS510 - Navigation decoding tool by Navi diagnostic
ADAPTERS:
CarProg Main harware interface
A1 - OBD2 Adapter Cable
(Inside have K-line and CAN bus switches. Use with all
cars complained with OBDII standard)
D1 - Odometer-airbag Adapter
(Dashboard ,Airbag programming adapter )
A3 - Transponder Antenna ( Used with all
CARPROG immobiliser software )
A10 - Motorola Adapter Cable
(Motorola MCU programing adapter )
A11 - BMW EWS Adapter Cable
( Used with BMW Immo software )
A16 - Car radio Cable
( Used for Opel, Renault, Peugeot, Citroen car radio made by Philips decoding)
A15 - Cable
( used with D1 adapter ,Universal car dashboard and airbag programming adapter )
A17 - Honda Airbag OBD2 Cable
( adapter for Honda airbag reset by OBDII )
A4 - Eeprom Adapter Cable
( Used for eeprom programming)
A5 - DIP8 Clip Cable
( DIP8 Clip for eeprom programming)
A6 - SOIC8 Clip Cable
( SOIC8 Clip for eeprom programming)
A7 - MB 38-Pin Cable
(Used with MB Airbag and dashboard software)
A8 - BMW 20-Pin Cable
( Used with BMW airbag and dashboard software )
RNS510 Adapter Cable
( RNS510 radio decoding interface cable )
VOLVO FORD CAN 2006+ Cable
(needed for airbag and dashboard programming)
FIAT CAN 2006 Cable
( needed for airbag and dashboard programming)
CD( software v4.74 , usermanuel- help pdf files)
C1 OBD2 Female Cable
USB Cable
Power cable
PACKING LIST
# 1 : CarProg Main interface
# 2 : A1 - OBD2 Adapter Cable
# 3 : D1 - Odometer-airbag Adapter
# 4 : A3 - Transponder Antenna
# 5 : A10 - Motorola Adapter Cable
# 6 : A11 - BMW EWS Adapter Cable
# 7 : A16 - Car radio Cable
# 8 : A15 ?Cable
# 9 : A17- Honda Airbag OBD2 Cable
# 10 : A4 - Eeprom Adapter Cable
# 11 : A5 - DIP8 Clip Cable
# 12 : A6 - SOIC8 Clip Cable
# 13 : A7 - MB 38-Pin Cable
# 14 : A8 - BMW 20-Pin Cable
# 15 : RNS510 Adapter Cable
# 16 : VOLVO FORD CAN 2006+ Cable
# 17 : FIAT CAN 2006 Cable
# 18 : C1 OBD2 Female Cable
# 19 : USB Cable
# 20 : Power cable
# 21 : CD ( v4,50 ,manuel pdf files )
Wholesale Contact Information
Email: sales@xcar360.com
Skype: uuc050
MSN: sales@xcar360.com
How To Buy Our Products
Product Reviews
| Name | Rating | Review |
|---|---|---|
| Fatjon (Posted on 2016-10-04) | very good pruduct, useful |
|
| Андрей (Posted on 2014-10-28) | All is well. |
|
| John (Posted on 2013-06-25) | I received it.good product,i want to buy 5 pcs,can you give me a discount? Reply: Hello,friend Thanks for your feedback.The sales@xcar360.com will contact you to talk about the details. Best Regards Xcar360 |
|
| Mark (Posted on 2013-06-25) | it a real version,wonderful.Thanks.
Mark Reply: Hello,friend Thanks for your feedback.And we will keep provide tech support. Best Regards Xcar360 |
|
| Jazzy B (Posted on 2013-06-18) | Hello, does the Can Bus protocol work on this Carprog?
Beacuse Can Bus Not working on Old Carprog.
Regards Reply: Hello,friend It support Can Bus Protocol Best Regards Xcar360 |
5 Item(s)
No Picture! Be the first to Post a Picture of this product! and get Xcar360 points!
Product Consulting
- Hi, this carprog have any counter inside? and what its the use of the USB dongle? Regards
- July 21, 2013
- Hello, carprog full v 4.74 have counter. But it dose not limit using. When digital is zero, screen will show update button. Press it, then machine could work again. Note, there updating is different from updating the firmware.
- Is there token limitation? I can't see reset cable on the photo.
- May 8, 2014
- YES, it is token limited. It include reset cable. Best Regards Xcar360
- Hi, please tell, what is the difference between this item and the SKU:OBD7016 item?
- June 10, 2014
- This is real 4.74 version ,all function can work. 7016 is just V4.01 ,can use new software. but new function is locked. Best Regards Xcar360
- Hi What is the difference between 4.74 and v6.8? thanks
- July 20, 2014
- Hi,friend The V4.74 is really version can use all function. But V6.8 is just update software.The hardware is V4.01 The new function can not use. Best Regards Xcar360
- Hello, Your Carprog key and dongle to reset the counter?
- September 21, 2014
- Yes, of course!
- Hello, Is iT possible with this program to get. THE immo key for à Renault megane from 2005? Thank you Danny moonen
- October 12, 2014
- Hi,friend I think you need this one http://www.xcar360.com/avdi-vehicle-diagnostic-interface-renault.html or this one http://www.xcar360.com/fnr-key-prog-4-in-1-key-prog-for-nissan-ford-renault.html Best Regards Steven
- Hello, i buy this tool & working good But now counter start in software, how can i reset counter? Thanks
- December 12, 2014
- Hi,friend We have a video in the cd show this . Best Regards Steven
- full activated , not N/A ???
- January 20, 2016
- this one out of stock now friend
