Shopping Global One World One Price

Things that you can do when X100 pad can not start

Thursday, November 29, 2018 2:54:02 AM America/Los_Angeles

What should we do when Xtool X100 Pad not start when update done, what should you do?

Read More
0 Comments | Posted in Automotive equipment feedback By junwen zheng

Mercedes Benz Star diagnosis tool DOIP device test report

Thursday, August 9, 2018 6:40:34 AM America/Los_Angeles

Hi, everyone

this is Steven GA from xcar360.

This year there are some new diagnostic tool for mercedes said support doip on market . today i make all test on 7 types mercedes diagnostic tools.

1.Mercedes star C4 SD CONNNECT XCAR360 100925 version

This one is one of the most stable quality in china, price around 480usd . it can support K and CAN and truck 24v ,

but it can't support DOIP . and also no DOIP cable .

 

2. Mercedes Star C4 sdconnect DOIP device

Recently one factory made a SDCONNECT DOIP device here , they add a DOIP PCB on the normal C4 . looks like the original doip device . price about $600

But after test . we found it can't support DOIP protocol . it support K and CAN protocol , but it didn't support DOIP like they claimed . and it also didn't with a DOIP diagnostic cable .

so this one is same as normal one now . worthless


3.Mercedes Star C5 cheap one

this one price about 500usd .

this one is a joke . it use cheap C4 PCB , then insert it to a C5 case.

it work on K and CAN, but the factory quality not good, easy broken on 24 truck and not stable.

so this one also worthless.

 

4.Mercedes Star diagnosis Xentry connect C5 real one

this one price about 1100usd .

this one is a 1:1 clone from original xentry VCI , the SSD software is in device, and with license in machine .

it complete support K-line CAN and DOIP protocol . The booting speed a little slow , but diagnostic speed is quick.

it can update use original DVD , and install all ADDONS , it support all mercedes until now .and can use in any laptop .

so , this is worth to buy until now . price is 1100usd and include license update 2year .

 mercede xentry connect doip

5.ECOM

this is a original device from ACTIA the price about 1000euro . it support CAN and DOIP , but didn't support K-line .

diagnostic speed is quickly .

 

6.Xentry VCI

this is a Original Device . but very expensive , perfect support K + CAN + DOIP protocol . Diagnostic speed very quickly.

only problem , price higher.


7. VXDIAG DOIP VCI

This is a new device price $600. we test on some car W205 and old ,support K + CAN + DOIP protocol .Diagnostic speed not very quickly . but ok, not sure can completely support all car K+CAN + DOIP .
the problem of this device is 
(1) , maybe not can full compatible for all mercedes like original device
(2) , update , this can't update by yourself .
it made by J2534 and a little like VAS 6154 VXDIAG version .
if driver not update on time , it may can't use on new software .
and this one update by HDD .
2 year update 4times update fee about 400usd .
it is ok to buy now .

vxdiag mercede vci

so, after we test

we give suggestion here .

1. if not need DOIP functions , SD CONNECT XCAR360 100925 version recommend to buy.

2. if you want a DOIP device and you can easy get update DVD, we suggest buy xentry connect C5 . update easy and orginal functions .

3. If you didn't have budget , and you still want a doip, you can buy vxdiag vci .

 

0 Comments | Posted in Automotive equipment feedback By Steven X

Feedback for China Xentry C5

Friday, May 4, 2018 1:20:38 AM America/Los_Angeles

We collect the Customer feedback for our Xentry connect C5

Advantage :

1. The mahcine is not the fake C5 , it is real xentry connect . it is with a system , i use xentry asstinace software connect it .

2. then the VCI will display in Xentry control . then i enter in xentry connect,  it with xentry DAS DTS and vediamo , i try on W231 222 all works good

3. Support DOIP new car

4.after first time start , the run speed is ok

5. The license and system is stable , it isn't like the C4 sometime lost license and sometime windows system have problem.

Disadvantage:

1.The first time open ,cost 2-3mins. speed slow

2. after works over 1 hour , the vci will be heat .

3. update a little complicated need install new DVD and use patch files , but now xcar360 looks provide online update version

all in all

If you need work on New car DOIP
you should buy it!
and worth it.

0 Comments | Posted in Automotive equipment feedback By Steven X

BMW ICOM P Module Program The BMW G12

Wednesday, April 4, 2018 4:15:16 AM America/Los_Angeles

The newest BMW Porduction level Diagnsotic tool ICOM P VCI For BMW ICOM P+B+C diagnosis And Programming Interface Wifi version support BMW G12 series car programming. Because P is BMW AG production service tool .

And if some poor quality ICOM a2 or next some can't support BMW G12

BMW ICOM P also support those functions

Some convenient settings that suit your driving habits at startup

01 Customized alarm time (seconds) when not wearing a seat belt
02 Disable Seat Belt Reminder - Passengers
03 Disable Seat Belt Reminder - Driver
04 After the ignition, the engine starts and stops in the state before the last flameout or the default is off by default.
05 Automatically unlock the engine after the engine stalls
06 The default mode after the engine starts is set to "Economy (Eco Economy) Mode"
07 The process of glass automatically rising to the top is not terminated by the opening of the car door
08 Open option: whether to turn on daytime running lights (angel eyes)
09 Setting highlight assist as "Automatic", automatic high-beam intersection control
10 Set the daytime running light (angel eyes) brightness (the original car defaults to the brightest)
11 Turn on the high beam light and turn on the fog light
12 unlock unlock sound confirmation, volume size adjustment
13 Automatically close the sunroof when it rains (it will cause the sunroof to need to be initialized and it will not start until 10 minutes after ignition).
14 After the fire turned off, the wiper returned to its original position
15 Automatically close the sunroof when it is raining under a tilt (this will cause the sunroof to initialize)
16 Set the number of turns of the turn signal when changing lanes (F30)
17 Open cic menu version check function (confirm CIC version)
18 3 kinds of Bluetooth phone ringtone selection
19 Increase the number of stored telephone numbers and messages in the car (from 25 to 50)
【Automatic constant temperature air conditioner】
20 Indoor cycling memory is the state of the last flameout
21 The last time the air conditioning memory was off
【Combination meter and navigation screen】
22 Display Engine Output Power and Torque Table on the Navigation Screen
23 Cancel large screen startup delay confirmation screen __
24 Rearview Camera Statement When Canceling Reverse
25 Suggested refueling points in navigation
26 Display speed limit information (hardware support required)
27 Torque Menu Display
28 automatic high beam
29 tire pressure monitoring
30 tire pressure and temperature display (hardware support required)
31 Chinese interface (Simplified Chinese, Traditional Chinese, etc.)
32 length units, miles to kilometers
33GPS time synchronization
34 Instrument Simulation Instantaneous Fuel Consumption 20 Change 30
35 Dash light is on
36 Dashboard is always on at night (535, GT, 7 Series, 530 parts)
37 Dashboard is always on during the day (535, GT, 7 Series, 530 parts)
38 Dashboard Gray (535, GT, 7 Series, 530 Parts)
39 Dashboard Orange or Grey (535, GT, 7 Series, 530 Parts)
40DS shows the current gear S1—S7
41 Header display (navigation distance, turn signal, etc.) (Hardware support required)
【Reversing Radar and Image】
42PDC reversing radar display horizontal and vertical transformation

0 Comments | Posted in Automotive equipment feedback By Steven X

Lonsdor K518ISE Key Programmer Plus SKE-LT Smart Key Emulator reads Renault Citroen Peugeot PIN code

Lonsdor K518ISE, the English version of Lonsdor K518, is an universal key programmer for all makes from Europe, America, Asia and China, also it can perform odometer adjustment for some makes.

Read More

Which is better for VAG & BMW , VVDI2 OR Zed Full?

Wednesday, November 22, 2017 12:09:46 AM America/Los_Angeles

VVDI 2 includes all the VVDI functions, the function of Tango, remote control generation and chip identification is improved, and also the coil’s stability has been enhanced.
More ever, users do no need to connect VVD2 with computer or other devices to identify chip or detect remote frequently.


Read More

Original MB star C5 with engineer software VS the Fake Star C5

Tuesday, November 21, 2017 11:06:51 PM America/Los_Angeles

Original MB star C5 with engineer software is newly tested working fine and released, Benz c5 can provide complete diagnosis for the newest hybrid W222. It is real 1:1 copy Star C5 not the old clone C5 with C4 internal PCB.

Read More
0 Comments | Posted in Automotive equipment feedback By Steven X

How to solve SDconnect tookit error SD CONNECT toolkit didn't work

Saturday, November 18, 2017 2:07:09 AM America/Los_Angeles

Here are customer solutions of what to do if SD connect Toolkit COM-Server has stopped functioning.

 

Some folks inform tried and solved it this way. (i have not tried this)

1. Open Taskmanager an Kill all Processes of SDconnect Toolkit(Tkserver.exeTktray.exe).
2. Go to DTS install folder and find the folder with the Tkserver.exe in it.
3. Delete this folder.
4. Install SDconnect toolkit from here:
https://mega.nz/#!rgExUb7Z

encryption key: fQAtu6sTOfHFhfQi5ZObBJr742wGa7_CXuLY33JLhfc

  1. Go to original SDconnect Path (C:\Program Files (x86)\Mercedes-Benz\SDconnect Toolkit\
    6. Copy filesToolkit.ini + SDVersion.dll
    7. Paste Toolkit.ini in C:\ProgramData\I+ME ACTIA\Toolkit\ and SDVersion.dllin Install-Directory of the new SDconnect Toolkit.
    8. Start SDconnect Toolkit from Startmenu (the SDconnect folder in Root of “All Programs”, not the one in “Mercedes-Benz” folder)

but i have another way that seems to work.
have not tried on vehicle yet but at least i get no more errors.

my base is a win 7 x64 system.
i have a clean and working installation of xentry xdos 05.2016.
but it should work with other Xentry versions too.

Now you install DTS Monaco and the Daimler Addon.
In my case it was Monaco 8.3.12 and the “setup_addon_dag.exe”.
Now restart the PC. You notice that the sdconnect toolkit does not start anymore.
Delete the “Start SDconnect Server” shortcut from the autostart folder.
Now restart the pc again or open the taskmanager and kill the process TkTray.exeand TkServer.exe.

Now you browse to “C:\Program Files (x86)\Mercedes-Benz\SDConnect toolkit\”.
Copy everything that is in that folder. (should be 6 subfolders, bin, doc, selftest and the update folders)

Now browse to “C:\Program Files (x86)\Softing\Diagnostic Tool Set 8\8.03\Interfaces\DCDI_DPduApi\eCOM_Toolkit”.
Delete everything that is in this folder.
Now paste the folders/files you copied from the Mercedes folder here.

Open the “bin” folder and copy the toolkit.ini file.
Or go back to the Mercedes folder and copy the toolkit.ini file from there.
Paste and replace this file into “C:\ProgramData\I+ME ACTIA\Toolkit”
(Note, the C:\ProgramData folder:

It is a hidden folderon Win7. I do not talk about c:\program files\ or c:\program files (x86)\ (name of these folders might be different if your windows is not english)
(you can get the right folder by opening the explorer and typing in the adress bar %programdata%)

With Win XP i guess the right folder could be something like “C:\Documents and Settings\All Users\Application Data”.
You could also try to just search for the toolkit.ini file on the whole C:\ drive. Should give you the location as well.)

Now restart the pc again.

In my case, deleting the autostart prevents the toolkit to start from the mercedes folder.
thanks to monaco the toolkit from the softing/interfaces/ecom folder will now start.
by replacing the toolkit in that folder we trick the system into starting a copy of the original toolkit.
my toolkit now starts without an error. i can open it again and everything seems to work. before it did not start at all or i got error messages.

0 Comments | Posted in Automotive equipment feedback By Steven X

MB sd connect couldn't connect to laptop 00 error

Wednesday, October 25, 2017 3:28:27 AM America/Los_Angeles

we get some feedback from some customer

The MB sd connect can't connect to laptop.
The status show 00.

MB SD CONNECT

 

and it can't show MB SD CONNECT

normally it is lost firmware in sd connect

so we show try rewrite it

1.Please insert the batteries to your MB SD CONNECT , otherwise write firmware will failure.

2.Please Right click on SD connect ICON

 

mb star C4

 

2.GO TO software update , update  00-03  , update sucusess you can see C4 again

MB SD CONNECT

0 Comments | Posted in Automotive equipment feedback By Steven X

Some Solution for WiTech connection issues - need to register device

Thursday, August 31, 2017 6:19:27 AM America/Los_Angeles

This is solution from forum user about  WiTech connection issues - need to register device

Note as of 8-22-17 , .
Chrysler issued an update in July that effected many owners of the original Mopar MicroPod2 and the clones. I'm one of the people effected. So I started messing around trying this and trying that to see if I could get it working again as I need it to scan my own family members vehicle. 
So I started looking into MicroPod2 issues and maybe its a firmware problem or something along that nature. Well the Micropod Model ID does cause an issue because its now on a blacklist unless you register your device. 
When playing around I found a string in one of the files that I deleted and I was able to connect to my vehicle again....
So using the latest 17.04.27 Witech I removed this one line of code and I get an error once connected to my car about the whole Witech 2.0/1.0 crap.....
So I removed the Witech 17.04.27 software and jumped backwards to Witech 16.05.15. I went back in and removed the same line of code and reconnected to my car. I would get an error message of "*********" . So I ignored it and "X"'d out the window. Clicked "Next" so the next screen shows up and I selected "Offline" for usage. 
Now keep in mind this whole time I am "NOT" connected to the internet!!!
Using Witech 16.05.15 I was able to connect to my vehicle without any issues at all! Now someone may know a fix around the error window that pops up and that's great, I'm hoping someone figures that out 


Anyways, in the added pictures you will see the error screen that pops up when using Witech 17.04.27 and then the actual connection to my vehicle when using Witech 16.05.15. (pictures are now removed)
Now I have tested various versions of Witech to see if I can make it to the connection screen to where it wants to connect to the car. Granted I was "NOT" at my car when the software was trying to connect as I tried 8 different versions of Witech in the past 3 1/2 hours and I did not want to go back and forth trying each one. It's also currently 2:41am while I'm typing this....
Now the code I changed was in the Witech software itself. I went to the file:
"PM me for the information"
Then edited the file titled "********"
There is a line in that code about half way down in a section titled "*****". I simply deleted the code for *************....
You may need an editor to do this, but my "NotePad" allowed me to edit it. Here is what I deleted:
----------------------------------------------------

"As of 8-19-17 the info is no longer posted"

----------------------------------------------------
Now your "value" may be different, I don't know as I'm not a programmer....
Once I deleted that section using the notepad, I saved the file. Closed everything out and restarted the witech server and the witech software and I was able to connect to my car. 
Remember, my internet was SHUT OFF while doing this 
Hope this helps you out, and maybe there will be more people chiming in on this topic

(as of 8-20-17)
Using MicroPod2 Clone
PC used: Windows 7 Home Premium 64bit with SP1
Also used MacBook Pro running Parallels with Win7
Witech verified to connect: Vs 16.01.18 / 16.04.10 / 16.05.15 / 17.01.18 / 17.03.10/17.04.27


witech softwarewitech 16.04.10

witech software16.05.15

witech device pod2

0 Comments | Posted in Automotive equipment feedback By Steven X

How to register BMW New Battery by INPA or Ediabas

Thursday, August 10, 2017 8:39:24 AM America/Los_Angeles

The battery needs to be registered when you replace it on BMW 7 series (5 series, 6 series etc). Here is the customer solution to show you how to register new battery with INPA or Ediabas toolset32.

—-Xcar360 Automotive diagnostic tool , diagnostic software  sales@xcar360.com

Credits to bimmerfest BMW experts.

Note: This is just for REGISTERING THE SAME SIZE BATTERY. You are at your risk.

First with BMW INPA software:


   

With Ediabas toolset32:

 

first go to file then click F3 then select POW_E65.prg

in the second pic double click the command (steuern_batterietausch_registrieren) just ones and you are done .

remember this is for registering the same size battery not for retrofitting another size , if you want to retrofit 90AGM battery you need to register the battery with DIS/ISTA because DIS/ISTA well register only 90AGM battery , if you want to retrofit another battery size you have to use NCS expert.

FAQ about register BMW battery:
Q: We always used inpa. Should i use both or registering with inpa is enough
A: registering ones is enough , some ppl have problem with INPA registering there battery so i put toolset32 .

Q: what is this battery thing ( registration ) with what the car computer
So if you take out the battery and say get a sears diehard gold . what happens can someone
explain . will another battery work ( doesn’t it just see a 12 volt power supply

A:You need AGM battery. It must be registered. Otherwise it wont charge properly. Our cars are very sensitive. If your battery is low or doesn’t get charged properly u will get different errors and faults. Your car need to know how it needs to charge battery thats why u need to register it. You can go to dealer, or u can set up bmw tools and do it yourself.

Q: Where do i get the software and cables to register my battery ?
A: BMW ICOM Next or BMW ICOM A2 with ISTA and engineering software INPA, Ediabas, Ncs expert etc. Check here BMW ICOM NEXT A+B+C with V2017.05 Software ISTA-D 4.05.20
ISTA-P 3.61.4.002 etc. You can also download ista torrent on forums and use with INPA K+DCAN cable. (You are at your risk. Better using ICOM emulator). If you are not good using software programmers, you can buy Foxwell NT510 BMW multi-system scanner that can be directly plugged into the OBD II port. It is located by the drivers door Behind a little flap near the lower hinge area. It is more expensive but can do more things and is specifically programmed for BMW/Mini.

Q:
The error above should be with INPA (using INPA ) I get “group file: D_POW.SYS-0012: Identification error” with no space between D and : but the system is making it an emoticon.


A:You might need to Update your Daten files . Better buy newer software package.

https://www.xcar360.com/catalogsearch/result/?q=BMW+ICOM&button.x=0&button.y=0&button=Search&order=relevance&dir=desc

0 Comments | Posted in Automotive equipment feedback By Steven X

How to Program 4th IMMO Key of Passat by OBDSTAR X300 DP

Tuesday, July 18, 2017 9:53:26 AM America/Los_Angeles

Here is the instruction on programming VAG Passat 4th IMMO Key by using OBDSTAR X300 DP key programmer and OBDSTAR RFID adapter (adapter chip reader for VAG 4th 5th IMMO function)

—-Xcar360 Automotive diagnostic tool , diagnostic software  sales@xcar360.com

Guide:

Dissemble the dashboard instrument

Connect X300 DP with VCI and Dash

Turn ignition on (If it is the smart key, turn ignition OFF then turn it ON)

  

Make sure dash instrument is black

 

Reading eeprom data

 

Save data
Read IMMO data

Turn ignition on (If it is the smart key, turn ignition OFF then turn it ON)
Make sure dash instrument is black

Read VIN, CS code and PIN and key info


Select Generate OEM Dealer Key (Can start car)

Turn ignition on
Connect OBDSTAR RFID adapter with X300 DP

 

 

 

Insert the original key (chip) into RFID adapter

RFID Indicator flashes, remove the first key chip
Follow X300 DP prompt to insert second key chip

RFID indicator flashes, reading key data
dash indicators turn on

 

 

Generating dealer key in progress

Generate dealer key success


Test the new key, it works!

0 Comments | Posted in Automotive equipment feedback By Steven X

OBDSTAR X-100 PRO Auto Key Programmer feedback

Thursday, May 25, 2017 9:21:43 PM America/Los_Angeles

This OBDSTAR X-100 PRO Auto Key Programmer  feedback from customer 

tool:OBDSTAR X-100 PRO Auto Key Programmer 

we hope it is useful when buy it.

Golf 4 1997 1.6 pin read OK
audi a4 1998 pin read. OK
touran 2007 d pin read ok
polo 2008 d pin read ok keys and remotes ok
corsa b 1.0/1.2 pin read no, several cars, pin read by carprog and next by x100 
Corsa c 1.0/1.2 pin read no, 2 cars, pin read by carprog and next by x100
Fabia 1.4 16v 2002 pin read from dash, ok
Passat 2002 1,9 tdi pin read from dash, ok
Honda Jazz 1,2 2004 pin code no.
Arosa 2003 immo2 pin code no
Peugeot 206 2003 1.4 add new key and remote. ok U need pin code.

Hyundai I-20 - fail to read pin code

peugeot 307  - fail to read pin code

Kia rio 2012.Read pin-ok.Programm new key-ok

Toyota corolla 2010-12.Add "G" KEY-OK

2007 ford focus pin reading OK and key coding but you need to go online to cal pin code

Chevrolet cruze  pincode read ok    key learning ok

2011 teana Add new key ok , calculated pin with ease no 10 min wait.

2007 superb fail to read pin.
2013 vw polo fail to read pin.

Ford Focus 2012 key programming -OK

Nissan Primera P11 2000. Chip 4D (ID60) - key programming - OK (need PIN).

Mazda cx7 2009 2009  Lost all smart key  Make new smart key after read outcode and  Calcultate to incode ok 
X100 green obdstar 
Outlander smart key adapte second key failed 
Because the universal pincode wrong 
So i made by skp 
Suzuki sx 2009 failed to make spare key 
Also because wrong universal pin code 
I copied and adapt remote manualy
Chevrolet aveo 2008 lost all key 
Make key and remote program ok

Honda early model with 3pin conector ok.
Mazda 6 2012 smart key ok transponder and remote,
Chevrolet cruze 2013,2012 pin reading ok,program key and remote ok,mileage ok.
Dodge Journey various models pin reading and key learning ok.
Nissan Versa 2015 and 2016 read bcm,calculate pin and smart key learning ok.
Hyunday Elantra 2010 key learning and neutralize ecm ok.
Ford Ecosport 2013 facelift program key ok.
Ford Fiesta 2014 facelift program key ok.
Ford Focus 2010 incode bypass and program key ok.
All this with x100 obdstar.

Rover hse 2012 all key lost ok 
santafe 2012 no pin read but program key ok 
i20 no pin code read but programing and remote ok
ford f150 raptor .....programing ok
rover 2015 programing ok

Chevrolet camaro 2010
ALL KEY LOST ok

0 Comments | Posted in Automotive equipment feedback By Steven X